Alarm Rules

The alarm rules provided by SuperMap iManager is shown below. Firstly, select alarm object and trigger conditions (including system CPU average useage rate, system memory average occupation rate, application memory average occupation rate, database offline, application offine, and average response time) . Then you need to set the time period and silent time, and check Yes or No in the Whether to Enable column. Finally, click “Confirm” to complete the setting of the alarm rule.

  • Silent time: Refers to that after last time alarm is triggered, the state of the alarm object is always triggered during the silent time, and after silent time, it will trigger alarm again. For example, you can choose the silent time to be 10 minutes. After 10 minutes, the alarm will be triggered again.
  • Whether to Enable: Refers to whether to enable the alarm rule. It can be disabled if the alarm rule is not needed for the time being.