Slop Protection Modeling
Instructions for use
The tool is capable of generating data on the fill side of the revetment, data on the cut side of the revetment, and road surface data based on road centerline and road engineering parameters.
This tool is not used alone, but combined with tools such as Road Analysis and Road Engineering Parameter Settings .
Parameter Description
| Parameter Name | Parameter Description | Parameter Type |
|---|---|---|
| Road Centerline | Enter the road centerline, as specified by the output of the Road Analysis tool. | GeoLine3D |
| Road Engineering Parameter | Enter the road engineering parameters, as specified by the output of the Road Engineering Parameter Settings tool. | RoadBasicParameters |
| Target Datasource | Select the datasource where result data is stored. | Datasource |
| Revetment _ Fill: (optional) |
Sets the name of the generated revetment fill data. The default name is Revetment_Fill. | String |
| Revetment_Excavation Aspect: (optional) |
Sets the name of the generated revetment excavation aspect data. The default name is Revetment_Excavation Aspect. | String |
| Road Surface Name (Optional) |
Sets the name of the generated road surface data. The default name is Road Surface. | String |
Output Result
| Parameter Name | Parameter Description | Parameter Type |
|---|---|---|
| Revetment _ Fill | Result Revetment Fill Region Dataset | DatasetVector |
| Revetment _ Excavation | Result Revetment Excavation Region Dataset | DatasetVector |
| Road Face | Results Road Region Dataset | DatasetVector |