Projection Transformation Parameter

Instructions for use

This tool is used to set parameters such as scale difference, Rotation angle, offset, and rotation origin involved in data Projection Transformation.

This tool is not used alone, but needs to be combined with related Data Processing tools, such as 3D Gaussian Data Generate Tiles .

Parameter Description

Parameter Name Parameter Description Parameter Type
Scale Difference:
(Optional)
Sets the scale difference. The units are one in a million. Defines the amount of scaling from the original coordinate system to the Target Coordinate System. The default value is 0. Double
Rotation Angle X:
(optional)
Sets the rotation angle of the data along the X axis in seconds. The default value is 0.
This parameter, together with Rotation angle Y and Z, determines the rotation angle of the data.
Double
Rotation Angle Y:
(optional)
Sets the rotation angle of the data along the Y axis in seconds. The default value is 0.
This parameter, together with Rotation angle X and Z, determines the rotation angle of the data.
Double
Rotation Angle Z:
(optional)
Sets the rotation angle of the data along the Z axis in seconds. The default value is 0.
This parameter, together with Rotation angle X and Y, determines the rotation angle of the data.
Double
Offset X:
(Optional)
Sets the offset of the data along the X axis. The default value is 0.
This parameter, along with Offset Y/Z, determines the coordinate offset of the data.
Double
Offset Y:
(Optional)
Sets the offset of the data along the Y axis. The default value is 0.
This parameter, along with Offset X/Z, determines the coordinate offset of the data.
Double
Offset Z:
(Optional)
Sets the offset of the data along the Z axis. The default value is 0.
This parameter, along with Offset X/Y, determines the coordinate offset of the data.
Double
Rotation Origin X:
(Optional)
Sets the X coordinate of the rotation point. The default value is 0.
This parameter, along with the rotation origin Y/Z, determines the data rotation point.
Double
Rotation Origin Y:
(Optional)
Sets the Y coordinate of the rotation point. The default value is 0.
This parameter, along with the rotation origin X/Z, determines the data rotation point.
Double
Rotation Origin Z:
(Optional)
Sets the Z coordinate of the rotation point. The default value is 0.
This parameter, along with the rotation origin X/Y, determines the data rotation point.
Double

Output Result

Parameter Name Parameter Description Parameter Type
Projection Transformation Parameter Projection Transformation Parameter CoordSysTransParameter