Three-dimensional flight analysis is to determine the flight route by setting a series of flight stations and related information in advance, and then execute the flight browsing operation, that is, to realize automatic browsing of the scene according to the determined flight route.

At present, this product provides two ways to realize 3D flight analysis: import existing flight path file and create new flight path file.

Import an existing flight path file

With this mode, you can import existing flight path files and set up site and camera parameters. Existing flight path files can be generated via SuperMap iDesktop/iDesktopX.

1. Click Scene-Flight Management-Start to pop up the Flight Management Panel and select Import Path.



2. Click Select to pop up the Choose File dialog box, select the flight path file *.fpf, and click Open .
3. When you import an existing flight path file, the dashboard displays information about it. Click to select any station, and the parameter information of the corresponding station will be displayed in the camera parameter setting bar, including: the flight time from the current station to the next station, the observation point position (longitude, latitude, altitude), the observation azimuth angle, and the observation inclination angle. Each parameter value of the site can be modified according to requirements.
4. You can navigate to the corresponding site to view through the positioning button behind each site, and delete the corresponding site through the delete button.
5. The New button in the Site Management bar allows you to create a new site based on the current camera viewpoint and supports setting and modifying site parameters.
6. Start, pause, or stop flying is controlled by the bottom buttons, and flight can be controlled by the forward and backward buttons.
7. You can export the flight path to the specified path by clicking the Export button in the Site Management tab.

Create a new flight path file

With this mode, you can create a flight path file, and then generate a flight path by setting the site and camera parameters. The procedure is as follows:

1. Click Scene - Flight Management button to pop up Flight Management Panel and select New Path.



2. The panel will create a new flight path with empty stops.
3. Move the mouse to adjust the scene camera to a suitable position, click the New button after site management, the current viewpoint will be regarded as a new site, and then adjust various parameters of the current site according to needs, including the flight time from the current site to the next site, the observation point position (longitude, latitude and altitude), the observation azimuth angle, and the observation inclination angle.
4. Repeat the previous step until all sites have been created and edited.
5. You can navigate to the corresponding site to view through the positioning button behind each site, and delete the corresponding site through the delete button.
6. Start, pause, or stop flying can be controlled by the buttons at the bottom, and flight can be controlled by the forward and backward buttons.
7. The Export button allows you to export the flight path to a specified path.

Give a typical example

An example of scene browsing based on flight management is shown below.